\

Better training, better results

Products

Heat Treating Equipment

Heat Treating Parts

Permanent Warming Systems

Pipe Repair Clamps, Enclosures

Sealants, Valve Packing, Bonders
Leak Sealing Hardware

Hot Tap/Line Stop Equipment

Pipeline Pigging Wye

Click Here to Order Leak Sealing Hardware

Call 800-662-8326 for Info

Schedule a Lunch & Learn

Click for Service Contacts

Leak Sealing Hardware

To order products on this page, contact your nearest Team office.

insert a clamp

Insert-A-Size Repair Clamps

Flexible, economical, reusable
Stops wide range of leaks on lines, unions, couplings, cells
Two (2) bar clamp covers provide 30 possible insert combinations
Catalog available
Seals with sealant injection
Inserts available ½” to 3 ½” NPS pipe
Design pressure is 1000 psig at 650 f
Crunch teeth seals

pipe cap

Pipe Caps

Swivel-mounted on a stainless steel chain
Available in sizes ¼” to 3”
Available in different materials
Provides fluid-tight seal
Manufactured to ANSI Standards and ASTM specifications

safety plug

Valve Safety Plugs

Swivel-mounted on a stainless steel chain
Available in sizes ¼” to 3”
Available in different alloys for special processes
Manufactured with a pressure-release channel to test for section leaking
Insures compliance with regulation
Provides fluid-tight seal
Manufactured to AANSI B1611 standards and ASTM specifications
Helps provide a safe work place

slotted stud

Slotted Studs

Made from SA 193 Grade B7 Steel
Available Sizes: ½” – 1 ½”
Available lengths: 3”- 12” Standard Flange stud lengths

injection gun

Sealant Injection Gun

Lightweight
Completely portable
Machined parts for accuracy
Services all Team injection valves
Self-priming
Usable in any position
Provides highest injection pressure
Locks to fitting under pressure
Internal valve relieves excess pressure

Standard Injection Valves with NPT threads

Standard Injection Valves with NPT threads

Made from ASME code materials
Sizes: 1 1/6”, 1/8” ¼”

injection ring

Injection Rings with NPT Threads

Made from ASME code materials
For stud sizes: ½” – 2”

sealtite pipr wrap

SealTite Pipe Wrap part No. 807-0033

For routine or emergency maintenance
Wrap and repair metal, plastic, fiberglass pipes
Reinforce pipe joints
Good for lower pressure, temperature applications

cap nut

Cap Nuts

Made to SA 194 Grade 4/7 specs
For stud sizes: ½” – 2”

HOME | COMPANY | CONTACT | EMPLOYEE TRAINING