Banner Image

Events

Apr 11 - 12, 2019

View
Northeast Gas Association Spring Operations Conference
Saratoga Hilton, Saratoga Springs, New York

Northeast Gas Association Spring Operations Conference addresses current issues, from workplace safety to new technology applications.

Sponsor: https://www.northeastgas.org/pdf/2019_spring_ops_prog.pdf
   Email Print
Apr 22 - 26, 2019

View
Radiographic Testing Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 36 hours
Lab - 4 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/radiographic-testing-level-i-training-class-april-22-2019-tickets-51250784476?aff=ebdshpsearchautocomplete
   Email Print
Apr 23 - 26, 2019

View
ELECTRIC POWER Conference & Exhibition
Mirage Events Center, Las Vegas, Nevada

The ELECTRIC POWER Conference & Exhibition is known as the gathering place for power generators to get up-to-date training, further their education, gain understanding of regulatory and policy changes, and access the latest products and technologies available on the market, ensuring safer, more efficient and more productive facilities across power generation. Visit TEAm at booth 820.

Sponsor: https://2019.electricpowerexpo.com
   Email Print
Apr 29 - May 3, 2019

View
Field Machining (FMS) Technician Level II Training Clas
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 8 hours
Lab - 32 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-april-22-2019-tickets-51250944956?aff=ebdssbdestsearch
   Email Print
Apr 29 - May 3, 2019

View
40 Hour Radiation Safety Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour radiation safety course that meets the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704, is necessary for individuals to work as an industrial radiographer, or as an assistant industrial radiographer.
The course will cover 10 CFR 34 Definitions, Radiation Characteristics, Exposure Devices, Agreement/Non‐Agreement States, Radiation Detection, Inverse Square Law, Emergencies and Case Histories.
The individual can be employed with any contractor that performs industrial radiography in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 6 hours
Lab - 34 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/40-hour-radiation-safety-class-april-29-2019-tickets-51330495895?aff=ebdssbdestsearch
   Email Print
May 5 - 11, 2019

View
Leak Repair (LRS) Technician Basic Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover the basic principles of on stream leak repairs including drill and tap, flange repair and enclosure repair techniques.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 18 hours
Lab - 22 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/leak-repair-lrs-technician-basic-training-class-may-5-2019-tickets-51330685462
   Email Print
May 6 - 10, 2019

View
Ultrasonic Testing Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of Team Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 24 hours
Lab - 16 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/ultrasonic-testing-level-ii-training-class-may-6-2019-tickets-51330875029
   Email Print
May 13 - 17, 2019

View
Field Machining (FMS) Technician Level II Training Clas
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 8 hours
Lab - 32 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-may-13-2019-tickets-51331026482
   Email Print
May 20 - 24, 2019

View
Field Machining (FMS) Technician Level II Training Clas
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 8 hours
Lab - 32 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-may-20-2019-tickets-51331173923
   Email Print
Jun 3 - 7, 2019

View
Field Machining (FMS) Technician Advanced Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Line Boring, Optical Telescope and Shaft Turning.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 6 hours
Lab - 34 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-june-3-2019-tickets-51331643327
   Email Print
Jun 3 - 7, 2019

View
Radiographic Testing Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 32 hours
Lab - 8 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/radiographic-testing-level-ii-training-class-june-3-2019-tickets-51331449748
   Email Print
Jun 10 - 14, 2019

View
Field Machining (FMS) Technician Advanced Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Line Boring, Optical Telescope and Shaft Turning.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 6 hours
Lab - 34 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-june-10-2019-tickets-51456386437
   Email Print
Jun 10 - 15, 2019

View
Leak Repair (LRS) Technician Intermediate Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover advanced principles of on stream leak repairs including but not limited to critical jobs, line crimping, pressure seal repairs, and valve seat repairs.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 20 hours
Lab - 20 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/leak-repair-lrs-technician-intermediate-training-class-june-10-2019-tickets-51456159759
   Email Print
Jun 17 - 21, 2019

View
Field Machining (FMS) Technician Advanced Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Line Boring, Optical Telescope and Shaft Turning.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 6 hours
Lab - 34 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-june-17-2019-tickets-51456633175
   Email Print
Jun 18 - 20, 2019

View
Radiographic Film Interpretation Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

24 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to radiographic film interpretation and evaluation.
Lecture - 12 hours
Lab - 12 hours
Total - 24 hours

Sponsor: https://www.eventbrite.com/e/radiographic-film-interpretation-training-class-june-18-2019-tickets-51456707397
   Email Print
Jun 24 - 28, 2019

View
Computed Radiography Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 24 hours
Lab - 16 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/computed-radiography-training-class-june-24-2019-tickets-51457944096
   Email Print
Jun 24 - 28, 2019

View
40 Hour Radiation Safety Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour radiation safety course that meets the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704, is necessary for individuals to work as an industrial radiographer, or as an assistant industrial radiographer.
The course will cover 10 CFR 34 Definitions, Radiation Characteristics, Exposure Devices, Agreement/Non‐Agreement States, Radiation Detection, Inverse Square Law, Emergencies and Case Histories.
The individual can be employed with any contractor that performs industrial radiography in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 6 hours
Lab - 34 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/40-hour-radiation-safety-class-june-24-2019-tickets-51458238978
   Email Print
Jul 1 - 3, 2019

View
Ultrasonic Thickness Testing A-Scan Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

24 Hour course that meets the educational requirements of Team Procedure 33.G.103-S1. The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT-CP-105 and ASNT SNT-TC-1A.
Lecture - 20 hours
Lab - 4 hours
Total - 24 hours

Sponsor: https://www.eventbrite.com/e/ultrasonic-thickness-testing-a-scan-training-class-july-1-2019-tickets-51459111588
   Email Print
Jul 8 - 12, 2019

View
Field Machining (FMS) Technician Level II Training Clas
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping.
The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 8 hours
Lab - 32 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-july-8-2019-tickets-51459232951
   Email Print
Jul 14 - 20, 2019

View
Leak Repair (LRS) Technician Basic Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover the basic principles of on stream leak repairs including drill and tap, flange repair and enclosure repair techniques.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 18 hours
Lab - 22 hours
Total - 40 hours

Sponsor: https://www.eventbrite.com/e/leak-repair-lrs-technician-basic-training-class-july-14-2019-tickets-51459395437
   Email Print
   Email Print