Banner Image

Events

Jun 22 - 26, 2020
07:30 AM - 05:00 PM

View
Radiographic Testing Level II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.

The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.

Lecture - 32 hours

Lab - 8 hours

Total - 40 hours

Sponsor: //www.eventbrite.com/e/radiographic-testing-level-ii-seminar-tickets-97764447093
   Email Print
Jul 6 - 10, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The iindividual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 32 hours

Total - 40 hours

The FMS Level II student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish base plate milling, paragon level operations, RTJ flange machining, bore seal flange machining and large hole drilling and tapping. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-tickets-94668880169
   Email Print
Jul 7 - 9, 2020
07:30 AM - 05:00 PM

View
Radiographic Film Interpretation Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

24 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to radiographic film interpretation and evaluation.
Lecture - 12 hours
Lab - 12 hours
Total - 24 hours

Sponsor: //www.eventbrite.com/e/radiographic-film-interpretation-seminar-tickets-97750188445
   Email Print
Jul 13 - 17, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour course for Line Stops up to and including 12” in size.
The course will cover the basic skills required to successfully complete a Line Stop/Hot Stop as means of temporary isolation, installing an Insert Valve into a pipeline for a permanent means of isolation and successfully completing an angle tap.
The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 22 hours

Lab - 18 hours

Total - 40 hours

This course is one week in length. (40 hours). The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete a line stop, hot stop, Insert Valve and/or an angle tap. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-ii-training-class-tickets-96916829847
   Email Print
Jul 26 - Aug 1, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Basic Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover the basic principles of on stream leak repairs including drill and tap, flange repair and enclosure repair techniques.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 18 hours
Lab - 22 hours
Total - 40 hours

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-basic-training-class-tickets-97758318763
   Email Print
Jul 28 - 30, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 16 hours

Total - 24 hours

This course is one week in length. (40 hours.) The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/myevent?eid=96925543911
   Email Print
Aug 3 - 5, 2020
07:30 AM - 05:00 PM

View
Ultrasonic Thickness Testing A-Scan Level II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This course meets the requirements of ASNT‐CP‐105 and is necessary for qualifications of individuals performing ultrasonic thickness measurement using A‐Scan ultrasonic systems as specified by ASNT‐SNT‐TC‐1A.
Lecture - 20 hours
Lab - 4 hours
Total - 24 hours

Sponsor: //www.eventbrite.com/e/ultrasonic-thickness-testing-a-scan-level-ii-seminar-tickets-97766818185
   Email Print
Aug 10 - 14, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The iindividual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 32 hours

Total - 40 hours

The FMS Level II student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish base plate milling, paragon level operations, RTJ flange machining, bore seal flange machining and large hole drilling and tapping. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: /www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-tickets-94668952385
   Email Print
Aug 10 - 14, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Advanced Technician Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover basic installation of Inflatable Bag Stops, Hi‐Stops and will provide basic knowledge of folding head line stops, pressure balanced machines and hydraulic power units.

The individual can be employed with any contractor that performs Inflatable Bag Stops and/or Hi‐Stops in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 24 hours

Lab - 16 hours

Total - 40 hours

Sponsor: //www.eventbrite.com/e/hot-tap-hts-advanced-technician-training-class-tickets-97756804233
   Email Print
Aug 18 - 20, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 16 hours

Total - 24 hours

The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-i-training-class-tickets-96926932063
   Email Print
Aug 24 - 28, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.

The course is designed to have the student to demonstrate their knowledge of the advanced principles of on stream leak repairs including simulated critical jobs, line crimps, and adjustable bar clamps. The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours

Lab - 24 hours

Total - 40 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-level-ii-tickets-94666627431
   Email Print
Sep 14 - 18, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

80 Hour course for Line Stops up to and including 12” in size and Freeze Stops.

The course will cover equipment setup/breakdown, measurements and basic tapping machine specific operation. The course will also provide basic instruction to setup/breakdown and operation for a Freeze Stop. The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours

Lab - 64 hours

Total - 80 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the basic knowledge to perform a hot tap up to and including 12” in tap size and safely perform a Freeze Stop using liquid nitrogen as a freeze medium. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-i-training-class-tickets-94671181051
   Email Print
Sep 14 - 18, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The iindividual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 32 hours

Total - 40 hours

The FMS Level II student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish base plate milling, paragon level operations, RTJ flange machining, bore seal flange machining and large hole drilling and tapping. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-tickets-94669044661
   Email Print
Sep 21 - 26, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Intermediate Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover advanced principles of on stream leak repairs including but not limited to critical jobs, line crimping, pressure seal repairs, and valve seat repairs.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours
Lab - 24 hours
Total - 40 hours

This course is one week in length. (40 hours) The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-intermediate-training-class-tickets-97773666669
   Email Print
Sep 22 - 24, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 12 hours

Lab - 28 hours

Total - 24 hours

The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-i-training-class-tickets-96927024339
   Email Print
Oct 5 - 9, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Advanced Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 6 hours

Lab - 34 hours

Total - 40 hours

The FMS Advanced student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish line boring operations utilizing boring and optical alignment equipment. Additionally, students will have the required knowledge to accomplish shaft turning operations utilizing end mounted and mid shaft portable machine tools. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-tickets-97780228295
   Email Print
Oct 19 - 23, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Intermediate Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover advanced principles of on stream leak repairs including but not limited to critical jobs, line crimping, pressure seal repairs, and valve seat repairs.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours
Lab - 24 hours
Total - 40 hours

This course is one week in length. (40 hours) The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-intermediate-training-class-tickets-97774459039
   Email Print
Oct 26 - 30, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour course for Line Stops up to and including 12” in size.
The course will cover the basic skills required to successfully complete a Line Stop/Hot Stop as means of temporary isolation, installing an Insert Valve into a pipeline for a permanent means of isolation and successfully completing an angle tap.
The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 22 hours

Lab - 18 hours

Total - 40 hours

This course is one week in length. (40 hours). The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete a line stop, hot stop, Insert Valve and/or an angle tap. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-ii-training-class-tickets-96917042483
   Email Print
Nov 2 - 6, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course for Line Stops up to and including 12” in size and Freeze Stops.

The course will cover equipment setup/breakdown, measurements and basic tapping machine specific operation. The course will also provide basic instruction to setup/breakdown and operation for a Freeze Stop. The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 17 hours

Lab - 23 hours

Total - 40 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the basic knowledge to perform a hot tap up to and including 12” in tap size and safely perform a Freeze Stop using liquid nitrogen as a freeze medium. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-i-training-class-tickets-94671387669
   Email Print
Nov 3 - 6, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 16 hours

Total - 24 hours

The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-i-training-class-tickets-96927249011
   Email Print
   Email Print