Banner Image

Events

Apr 6 - 10, 2020
07:30 AM - 05:00 PM

View
40 Hour Radiation Safety Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour radiation safety course that meets the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704, is necessary for individuals to work as an industrial radiographer, or as an assistant industrial radiographer.

The course will cover 10 CFR 34 Definitions, Radiation Characteristics, Exposure Devices, Agreement/Non‐Agreement States, Radiation Detection, Inverse Square Law, Emergencies and Case Histories.

The individual can be employed with any contractor that performs industrial radiography in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 35 hours

Lab - 5 hours

Total - 40 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have met the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/40-hour-radiation-safety-class-tickets-96649550407
   Email Print
Apr 13 - 17, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour course for Line Stops up to and including 12” in size.
The course will cover the basic skills required to successfully complete a Line Stop/Hot Stop as means of temporary isolation, installing an Insert Valve into a pipeline for a permanent means of isolation and successfully completing an angle tap.
The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 22 hours

Lab - 18 hours

Total - 40 hours

This course is one week in length. (40 hours). The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete a line stop, hot stop, Insert Valve and/or an angle tap. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-ii-training-class-tickets-96911497899
   Email Print
Apr 14 - 16, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 16 hours

Total - 24 hours

The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-i-training-class-tickets-96922585061
   Email Print
Apr 14 - 16, 2020
07:30 AM - 05:00 PM

View
Radiographic Film Interpretation Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

24 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to radiographic film interpretation and evaluation.
Lecture - 12 hours
Lab - 12 hours
Total - 24 hours

Sponsor: //www.eventbrite.com/e/radiographic-film-interpretation-seminar-tickets-96949888727
   Email Print
Apr 20 - 24, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level II Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The iindividual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 32 hours

Total - 40 hours

The FMS Level II student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish base plate milling, paragon level operations, RTJ flange machining, bore seal flange machining and large hole drilling and tapping. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-ii-training-class-tickets-94668787893
   Email Print
Apr 20 - 22, 2020
07:30 AM - 05:00 PM

View
Ultrasonic Thickness Testing A-Scan Level II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This course meets the requirements of ASNT‐CP‐105 and is necessary for qualifications of individuals performing ultrasonic thickness measurement using A‐Scan ultrasonic systems as specified by ASNT‐SNT‐TC‐1A.
Lecture - 20 hours
Lab - 4 hours
Total - 24 hours

Sponsor: //www.eventbrite.com/e/ultrasonic-thickness-testing-a-scan-level-ii-seminar-tickets-96953497521
   Email Print
Apr 20 - 24, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Intermediate Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover advanced principles of on stream leak repairs including but not limited to critical jobs, line crimping, pressure seal repairs, and valve seat repairs.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours
Lab - 24 hours
Total - 40 hours

This course is one week in length. (40 hours) The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-intermediate-training-class-tickets-96689766695
   Email Print
Apr 24, 2020 - May 1, 2019
07:30 AM - 05:00 PM

View
Radiographic Testing Level I Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 36 hours
Lab - 4 hours
Total - 40 hours

Sponsor: //www.eventbrite.com/e/radiographic-testing-level-i-seminar-tickets-97752689927
   Email Print
May 4 - 8, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Advanced Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 40 Hour course will cover increasingly advanced processes and equipment related to Field Machining, as well as Bore Seal Flange Machining and Large Hole Drilling and tapping. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 6 hours

Lab - 34 hours

Total - 40 hours

The FMS Advanced student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to accomplish line boring operations utilizing boring and optical alignment equipment. Additionally, students will have the required knowledge to accomplish shaft turning operations utilizing end mounted and mid shaft portable machine tools. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-advanced-training-class-tickets-94751683837
   Email Print
May 11 - 15, 2020
07:30 AM - 05:00 PM

View
40 Hour Radiation Safety Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour radiation safety course that meets the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704, is necessary for individuals to work as an industrial radiographer, or as an assistant industrial radiographer.

The course will cover 10 CFR 34 Definitions, Radiation Characteristics, Exposure Devices, Agreement/Non‐Agreement States, Radiation Detection, Inverse Square Law, Emergencies and Case Histories.

The individual can be employed with any contractor that performs industrial radiography in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 35 hours

Lab - 5 hours

Total - 40 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have met the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: www.eventbrite.com/e/40-hour-radiation-safety-class-tickets-96649596545
   Email Print
May 11 - 15, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Advanced Technician Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course will cover basic installation of Inflatable Bag Stops, Hi‐Stops and will provide basic knowledge of folding head line stops, pressure balanced machines and hydraulic power units.

The individual can be employed with any contractor that performs Inflatable Bag Stops and/or Hi‐Stops in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 24 hours

Lab - 16 hours

Total - 40 hours

Sponsor: //www.eventbrite.com/e/hot-tap-hts-advanced-technician-training-class-tickets-97754838353
   Email Print
May 17 - 23, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Basic Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover the basic principles of on stream leak repairs including drill and tap, flange repair and enclosure repair techniques.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.
Lecture - 18 hours
Lab - 22 hours
Total - 40 hours

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-basic-training-class-tickets-97757598609
   Email Print
May 18 - 22, 2020
07:30 AM - 05:00 PM

View
Ultrasonic Testing Level I Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.

The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.

Lecture - 32 hours

Lab - 8 hours

Total - 40 hours

Sponsor: //www.eventbrite.com/e/ultrasonic-testing-level-i-seminar-tickets-97759149247
   Email Print
Jun 2 - 4, 2020
07:30 AM - 05:00 PM

View
Field Machining (FMS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

The 24 Hour course will cover basic processes and equipment related to Field Machining. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper. The individual can be employed with any contractor that performs Field Machining in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 8 hours

Lab - 16 hours

Total - 24 hours

The FMS Level I student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the required knowledge to complete ID and OD mount flange facing, pipe cutting and beveling, pipe counter boring and transition beveling, hole drilling and tapping, stud drilling and removal, keyway cutting and cutting tool sharpening. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/field-machining-fms-technician-level-i-training-class-tickets-96924304203
   Email Print
Jun 8 - 9, 2020
07:30 AM - 05:00 PM

View
Liquid Penetrant Testing Level I & II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

12 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.

The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.

Lecture - 8 hours

Lab - 4 hours

Total - 12 hours

Sponsor: //www.eventbrite.com/e/liquid-penetrant-testing-level-i-ii-seminar-tickets-96905846997
   Email Print
Jun 8 - 13, 2020
07:30 AM - 05:00 PM

View
Leak Repair (LRS) Technician Intermediate Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

This 40 Hour course meets the educational requirements of the TEAM certification process.
The course will cover advanced principles of on stream leak repairs including but not limited to critical jobs, line crimping, pressure seal repairs, and valve seat repairs.
The individual can be employed with any contractor that performs on stream leak repairs in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours
Lab - 24 hours
Total - 40 hours

This course is one week in length. (40 hours) The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/leak-repair-lrs-technician-intermediate-training-class-tickets-97762356841
   Email Print
Jun 10 - 12, 2020
07:30 AM - 05:00 PM

View
Magnetic Particle Testing Level I & II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

20 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.
The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.
Lecture - 16 hours
Lab - 4 hours
Total - 20 hours

Sponsor: //www.eventbrite.com/e/magnetic-particle-testing-level-i-ii-seminar-tickets-97763323733
   Email Print
Jun 15 - 26, 2020
07:30 AM - 05:00 PM

View
Hot Tap (HTS) Technician Level I Training Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

80 Hour course for Line Stops up to and including 12” in size and Freeze Stops.

The course will cover equipment setup/breakdown, measurements and basic tapping machine specific operation. The course will also provide basic instruction to setup/breakdown and operation for a Freeze Stop. The individual can be employed with any contractor that performs Line Stops, Hot Stops, Insert Valves and/or angle taps in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 16 hours

Lab - 64 hours

Total - 80 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have the basic knowledge to perform a hot tap up to and including 12” in tap size and safely perform a Freeze Stop using liquid nitrogen as a freeze medium. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/hot-tap-hts-technician-level-i-training-class-tickets-94671026589
   Email Print
Jun 15 - 19, 2020
07:30 AM - 05:00 PM

View
40 Hour Radiation Safety Class
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 hour radiation safety course that meets the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704, is necessary for individuals to work as an industrial radiographer, or as an assistant industrial radiographer.

The course will cover 10 CFR 34 Definitions, Radiation Characteristics, Exposure Devices, Agreement/Non‐Agreement States, Radiation Detection, Inverse Square Law, Emergencies and Case Histories.

The individual can be employed with any contractor that performs industrial radiography in any number of settings, i.e.: power plants, refineries, pulp and paper.

Lecture - 35 hours

Lab - 5 hours

Total - 40 hours

The student must pass with a composite score of at least 70% to be awarded a certificate of completion. Upon successful completion of the course, the student will have met the requirements of U.S.NRC and Agreement State Regulations and the U.S. Department of Transportation Title 49 CFR, Part 172.704. Any prior education or training must be evaluated before any credit would be applied to this course.

Sponsor: //www.eventbrite.com/e/40-hour-radiation-safety-class-tickets-96649819211
   Email Print
Jun 22 - 26, 2020
07:30 AM - 05:00 PM

View
Radiographic Testing Level II Seminar
TEAM Technical School, 200 Hermann Drive, Alvin, Texas

40 Hour course that meets the educational requirements of TEAM Procedure 33.G.103‐S1.

The course will cover an introduction to NDT and its different techniques. Become familiar with ASNT‐CP‐105 and ASNT SNT‐TC‐1A.

Lecture - 32 hours

Lab - 8 hours

Total - 40 hours

Sponsor: //www.eventbrite.com/e/radiographic-testing-level-ii-seminar-tickets-97764447093
   Email Print
   Email Print