Printed from: TEAM Inc.
  https://www.teaminc.com/

Print Page
Print

Banner Image

SmartStop™ Double Block and Bleed Line Intervention

Double the Isolation. Double the Reliability.

Innovative Design Enables Insertion Under Flow Conditions

At TEAM, innovation never ends. Our patent pending SmartStop™ double block and bleed technology allows proven, high-integrity isolations to be made on critical assets safely and reliably.

Unlike conventional single barrier line stop systems, TEAM’s SmartStop™ system features a dual seal system allowing isolation integrity to be physically confirmed ahead of breaking any down-stream containment. An integral bleed port allows the interspace between the primary and secondary seals to be vented, proving seal integrity on setting the tool and demonstrate zero energy throughout the duration of the isolation. The use of self-energized seals eliminates the need for seal activation using complex hydraulics.

Featured Box Image
Featured Box Image

Learn More About Our SmartStop Services

  • Capabilities

    TEAM SmartStop Capabilities

    • 4” – 16” diameters available, 18" – 48" in production
    • Deployed through a single standard line stop fitting
    • No secondary reinforcement sleeve or hot tap required
    • Compact design with minimal degrees of freedom
    • Innovative primary and secondary self-energizing seals
    • Ability to internally monitor and vent the interspace between the seals
    • Designed to ANSI 900# @ 2220 psi and NACE MR0175 compliant



  • Advantages

    TEAM SmartStop Advantages

    • Monitors and Proves Isolation Integrity Throughout Project
    • Reduced Fitting Requirement
    • Reliability Through Simplicity
    • Enhanced Flow Capability
    • Largest and Most Diverse Inventory of Line Isolation Equipment
    • Seamless Service Solutions Backed by Decades of Experience
  • Common Applications

    Common Applications

    • Valve installation/replacement
    • Pipe replacement
    • Pipe repairs
    • Repair pressure letdown stations
    • Valve repairs
    • Decommissioning pipes
    • Pressure vessel isolations
    • Rerouting of process flow
    • External leakrepair
  • Fully-Certified Techs

    Fully-Certified Techs

    TEAM’s line intervention technicians are put through a rigorous, method specific, multi-level certification and training process resulting in the industry’s most knowledgeable and experienced team. 

  • Integrated Solutions

    Integrated Solutions

    TEAM responds to our clients’ needs for increased asset management efficiency and reliability by providing higher value solutions with integrated services, covering projects from inception to completion. This allows for time and cost saving opportunities to be identified from reduced man hours and increased time on tools throughout the project. 

  • Digital Solutions

    Digital Solutions

    Our digital platform turns slow paper-driven bolting processes into streamlined, fully-automated and fully transparent operations.  This results in less re-work, more time-on-tools and less manual data entry for improved efficiencies.

Fittings and Equipment

TEAM designs, develops and manufactures the most complete and time-tested hot tap and line stop equipment inventory in the world. We have achieved numerous industry firsts and maintain our position at the forefront of technology and best practices. Our sales, engineering, manufacturing and field personnel draw from decades of experience and wisdom to provide you with solutions for any type of piping problem, without shut down or interruption of service. All TEAM fittings and equipment can be paired with our integrated hot tap and line intervention services.

  • Split Tee Fittings

    Split Tee Fittings

    • Suitable for both hot taps and line stops
    • Compatible with standard hot tapping/plugging
    • Equipment
    • Eliminate nozzle alignment problems
    • No potential for weld to penetrate tapping area
    • Allow full-bore hot tap size
    • Full range of reducing branch sizes available
    • Custom fittings for any size, flange rating,
    • Temperature, pressure and process
  • Sealing Elements

    Sealing Elements

    • Pressures to 1,480 psi
    • Sizes from 3 ̋ to 36 ̋
    • Temperatures to 350°F
    • Available drilled, ground-to-size, unground
    • Buna-N material standard
    • Viton, EPDM, Aflas available

Contact an Expert


All Content Rights Reserved , TEAM Inc.
Captavi - SaaS CMS Platform ©