Printed from: TEAM Inc.
  https://www.teaminc.com/

Print Page
Print

Banner Image

Specialty Line Stops

Providing innovative line stops solutions for
unique challenges.

Inflatable Line Stops

Inflatable bag stops are another method of line isolation. This method is used when a pipe is out of round or inside surface conditions of the pipe prevent a standard line stop. It can also be used to back up a line stop. A smaller hot tap is made into a pipe and an inflatable bag is inserted into the pipe which stops the flow in the line.

Featured Box Image
Featured Box Image

Freeze Stops

The freeze stop is an economical and non-intrusive method used to isolate piping systems. It is ideal for piping made of carbon steel, stainless steel, alloys or cast iron that contain water, hydrocarbons or any chemical with a suitable freeze point and no flow. It is also suitable for effectively isolating sections of pipe where valves are unavailable or inoperable.

Featured Box Image
Featured Box Image
Featured Box Image

Learn More About Our Specialty Line Stop 

  • Additional Capabilities

    Additional Capabilities

    • Through-the-Valve Stop
    • Across-the-Header Stop
    • Tee Stop
    • Elbow Stop
    • Double Block-and-Bleed Stop
    • Double Line Stop
  • Advantages

    TEAM Line Stop Advantages

    • Eliminates shutdowns or service interruptions
    • Modifies or repairs a pressurized pipeline in a safe, expedient and cost-effective manner
    • Prevents emissions and loss of product
    • Eliminates the need to blow down miles of line in between valves
    • Offers custom service solutions
    • Ensures fast delivery of resources to your job site
    • Eliminates sediment fallout and pipe damage which result from de-pressurization
  • Fully-Certified Techs

    Fully-Certified Techs

    TEAM’s hot tap line intervention technicians are put through a rigorous, method specific, multi-level certification and training process resulting in the industry’s most knowledgeable and experienced team. 

  • Integrated Solutions

    Integrated Solutions

    TEAM responds to our clients’ needs for increased asset management efficiency and reliability by providing higher value solutions with integrated services, covering projects from inception to completion. This allows for time and cost saving opportunities to be identified from reduced man hours and increased time on tools throughout the project. 

  • Digital Solutions

    Digital Solutions

    Our digital platform turns slow paper-driven bolting processes into streamlined, fully-automated and fully transparent operations.  This results in less re-work, more time-on-tools and less manual data entry for improved efficiencies.

Fittings and Equipment

All TEAM fittings and equipment can be paired with our integrated hot tap and line intervention services.

  • Split Tee Fittings

    Split Tee Fittings

    • Suitable for both hot taps and line stops
    • Compatible with standard hot tapping/plugging
    • Equipment
    • Eliminate nozzle alignment problems
    • No potential for weld to penetrate tapping area
    • Allow full-bore hot tap size
    • Full range of reducing branch sizes available
    • Custom fittings for any size, flange rating,
    • Temperature, pressure and process
  • Full Encirclement Saddle Fittings

    Full Encirclement Saddle Fittings

    • Handles both hot taps and line stops
    • Compatible with existing hot tapping/plugging equipment
    • Nozzle holds fitting pressure
    • Eliminates pressure-bearing fillet welds
    • Minimizes hot tap size
    • Available in 3 ̋ to 36 ̋ sizes, any alloy
    • Full range of reducing branch sizes available
  • Bolt-On Fittings

    Bolt-On Fittings

    • Handles critical service for extended periods of time
    • Available for hot taps and line stops
    • Sizes from ½ ̋ to 36 ̋ (15 mm to 900 mm)
    • 150#, 300# and 600# ANSI rated flanges
    • No welding required
    • Effective in fluctuating temperatures and pressures
    • Can be utilized to reenter the line
    • Custom-manufactured options available for any size, shape, pressure, temperature, process or material
  • Gas Distribution and Transmission Fittings

    Gas Distribution and Transmission Fittings

    • ANSI 150# and 300# series
    • No special adapters required
    • Pressure control fittings for steel piping
    • 1-1/4 ̋ to 3 ̋ threaded fittings with completion plug, O-ring and cap
    • 4 ̋ to 12 ̋ flanged fittings with completion plug, O-ring and blind flange


  • Sealing Elements

    Sealing Elements

    • Pressures to 1,480 psi
    • Sizes from 3 ̋ to 36 ̋
    • Temperatures to 350°F
    • Available drilled, ground-to-size, unground
    • Buna-N material standard
    • Viton, EPDM, Aflas available



Contact an Expert


All Content Rights Reserved , TEAM Inc.
Captavi - SaaS CMS Platform ©